Skip to content

The shop for professionals – business accounts, volume discounts & more

Cart

Encyclopedia

Bump cap (EN 812)

An industrial bump cap to EN 812 protects the head against injuries from bumping into hard, stationary objects. It does not protect against falling objects, thrown ropes or moving loads and therefore does not replace an industrial safety helmet to EN 397. In Germany, DIN EN 812:2012-04 applies.

View matching products: Head protection and accessories

When is this relevant?

Relevant for areas with low ceilings, pipework or machine parts where the head can bump, for example in maintenance or in warehouses. Where a safety helmet is mandatory, for example through the mandatory sign M02, a bump cap is not sufficient. Whether a safety helmet is needed is clarified by the risk assessment.

Bump cap or safety helmet

  • Bump cap to EN 812: protection against the head striking stationary objects
  • Safety helmet to EN 397: protection against falling objects and additionally against impact
  • The standard expressly points out that the bump cap must not be confused with an industrial safety helmet

Marking and testing

The standard EN 812 is marked inside the cap. It counts as personal protective equipment of category II. Optional additional tests concern, among other things, cold at minus 20 or minus 30 degrees Celsius and electrical properties at 440 V alternating voltage.

Use

Notes on the selection and use of industrial bump caps are given in DGUV Rule 112-193 Use of head protection.

Example from the range

The First Base 3 Classic bump cap is available in bright yellow under head protection and accessories.

Sources

  • DIN: DIN EN 812:2012-04, industrial bump caps (note on delimitation from EN 397)
  • KomNet NRW: Dialog 2371 on bump caps
  • DGUV Test: Test principle GS-IFA-P02, safety helmets and bump caps (as of 04.2020)
  • DGUV Rule 112-193: Use of head protection