Disposable gloves: protection for short tasks involving liquids
Disposable gloves are thin, liquid-tight gloves for single use. Depending on the model, they have a material thickness between 0.07 and 0.20 millimeters in our range and are made of nitrile, natural latex, vinyl, or blends such as tripolymer. For occupational safety, what matters is what a model is tested against: chemical protection according to DIN EN ISO 374-1:2018-10 with Types A, B and C and protection against microorganisms according to DIN EN ISO 374-5:2017-03.
You will find models from MAPA, Ansell, KCL, Ejendals (Tegera) and Helmut Feldtmann. Thicker chemical protection gloves are intended for prolonged contact with hazardous substances, for example made of butyl or Viton. Which version is required is determined by your company's risk assessment.

Where disposable gloves are used
Typical uses include laboratories, food processing, cleaning, workshops, and healthcare. Disposable gloves protect the skin during short tasks and are then discarded.
What to check before purchasing
- PPE category: Category I covers only minimal risks. For hazardous substances and microorganisms, Category III is required under Annex I of Regulation (EU) 2016/425.
- Chemical protection: Type A, B, or C according to DIN EN ISO 374-1:2018-10 and the identification letters of the tested chemicals.
- Microorganisms: Tested according to DIN EN ISO 374-5:2017-03; the addition of VIRUS indicates that the glove has also been tested against viruses.
- Material: Nitrile and vinyl are latex-free; for natural latex, pay attention to the protein content.
- Material thickness: Thin for tactile sensitivity, thicker for greater durability.
- Food contact: Only models with the glass and fork symbol or the indication "for food contact".
Disposable glove or chemical protective glove?
Disposable gloves can be chemical protection gloves, but they do not have to be. According to TRGS 401 (October 2022 edition), chemical protection gloves are classified as liquid-tight protective gloves according to DIN EN ISO 374-1:2018-10 and medical gloves according to DIN EN 455-1:2022-04. What matters is the test against the substances at the workplace:
- Type C: at least 10 minutes breakthrough time for at least one test chemical, for example the MAPA Solo 990 made of vinyl.
- Type B: at least 30 minutes for at least three test chemicals, such as MAPA Solo blue 997 or Ansell Microflex 94-242.
- Type A: at least 30 minutes for at least six test chemicals, such as the Ansell Microflex 93-260 made of nitrile and neoprene.
- Without chemical testing: Category I disposable gloves only protect against minimal risks.
The test time in the laboratory is not the wear time at the workplace. According to TRGS 401, a substance may penetrate faster under practical conditions, for example at skin temperature; you should ask the manufacturer about the actual breakthrough time. Which materials are suitable for what is explained in the glossary under Glove Materials. You can find more robust models under Nitrile Gloves and Latex Gloves.

Put on, wear and dispose of correctly
Disposable gloves only provide protection if used correctly:
- Only put on gloves with clean and dry hands.
- When removing gloves, do not touch the outside with bare skin.
- Change immediately after contact with chemicals or if damaged.
- Dispose of after use; do not reuse.
Prolonged wear of liquid-tight gloves can affect the skin; TRGS 401 takes this into account for wet work. For regular requirements, the B2B registration is worthwhile.
Questions about disposable gloves
What do types A, B and C mean on disposable gloves?
What do types A, B and C mean on disposable gloves?
The types are derived from DIN EN ISO 374-1:2018-10. Type A withstands at least six test chemicals for at least 30 minutes each, Type B at least three test chemicals for 30 minutes each, and Type C at least one test chemical for 10 minutes. The letters below the pictogram indicate the substances tested.
Do disposable gloves protect against viruses?
Do disposable gloves protect against viruses?
Only if they have been tested for this. Gloves tested to DIN EN ISO 374-5:2017-03 protect against bacteria and fungi; the VIRUS designation below the pictogram indicates additional testing against viruses. In our range, this applies, for example, to the MAPA Solo 980.
Do workers who use latex gloves need an occupational health screening?
Do workers who use latex gloves need an occupational health screening?
Yes, if natural rubber latex gloves contain more than 30 micrograms of protein per gram of glove material. In this case, a mandatory medical examination is required under the Ordinance on Occupational Medical Examinations (ArbMedVV). You can obtain information about the protein content from the manufacturer; latex-free alternatives include nitrile and vinyl.
What material thickness makes sense?
What material thickness makes sense?
The range in the assortment is from 0.07 to 0.20 millimeters. Thin gloves provide tactile sensitivity for delicate work, while thicker models are more durable. The Ansell Microflex 93-260 Type A, for example, is 0.20 millimeters.
Are disposable gloves of category I sufficient for cleaning work?
Are disposable gloves of category I sufficient for cleaning work?
For weakly active cleaning agents, Regulation (EU) 2016/425 provides for Category I. As soon as hazardous substances are involved, such as concentrated cleaners or disinfectants with hazard labeling, Category III chemical protective gloves are required.
Weiterführende Links und Quellen
Quellen
- DIN Media: DIN EN ISO 374-1:2018-10 (abgerufen am 15.11.2026)
- DIN Media: DIN EN ISO 374-5:2017-03 (abgerufen am 15.11.2026)
- BAuA: TRGS 401 Gefährdung durch Hautkontakt, Ausgabe Oktober 2022 (abgerufen am 15.11.2026)
- Verordnung (EU) 2016/425 über persönliche Schutzausrüstungen, Anhang I (abgerufen am 15.11.2026)
- KomNet NRW: Vorsorge bei Naturgummilatexhandschuhen nach ArbMedVV (abgerufen am 15.11.2026)
- IHK München: Merkblatt Lebensmittelbedarfsgegenstände, Januar 2025 (abgerufen am 15.11.2026)
- Herstellerangaben in den Produktdaten (abgerufen am 15.11.2026)
Die Auswahl der Schutzausrüstung richtet sich nach der Gefährdungsbeurteilung Ihres Unternehmens.


