Occupational shoes are not safety shoes: What the standard specifies
Occupational shoes are work shoes according to EN ISO 20347 and have no mandatory toe protection. According to the DGUV occupational health and safety guidelines for foot protection, they do not need to have a toe cap, whereas safety shoes according to EN ISO 20345 have a cap tested to withstand an impact energy of 200 joules. The scope of the standard covers shoes for which there are no mechanical risks from impact or compression (2012 edition according to DIN Media). The current standard is DIN EN ISO 20347:2024-06.
This leads to the most important rule for purchasing: an occupational shoe is not a substitute for a safety shoe. Whether an occupational shoe is sufficient is determined by your company's risk assessment. If there is a risk from falling or striking objects, you will find safety shoes in our range.
Here you will find occupational shoes as low shoes, clogs, and sandals, mainly from ABEBA and ELTEN. You can also find suitable shoes for healthcare professions under Medicine & Healthcare.
Our assessment: In healthcare and retail, occupational shoes are primarily valued for their slip resistance, comfort during long shifts and, depending on the area, their ESD properties. According to the DGUV example list, protection against impact is not a major factor in these areas.

Where a work shoe is enough and where it isn't
In its list of examples (as of 12 March 2024), the DGUV recommends either occupational shoes (O) or safety shoes (S) with a 200-joule toe cap for each activity. This does not replace the risk assessment. The list gives occupational shoes as examples for:
- Nursing and medicine: operating theatres, pathology departments, linen rooms, general nursing areas and disinfection
- Food retail: meat and fish preparation as well as wet cleaning
- Sales: meat and sausage products
The same list recommends safety shoes for the kitchen when moving heavy loads and pulling or pushing trolleys, for the wash-up area, for warehouse workers and for handling heavy goods in retail. For such activities, S1 safety shoes or S2 are suitable.
The actual activity is what matters, not the job. The list gives recommendations for each activity within a business sector, which is why a company may need both types of shoes. For example, anyone who moves between sales, goods-in and the warehouse needs safety shoes at workstations where there is a risk of impact. This is our interpretation of the list of examples.
OB, O1, O2 and more: The categories of occupational footwear
Work shoes feature an O instead of an S in the short designation. According to the DGUV overview of the 2022 standard, these categories apply to Class I shoes made of leather and other materials:
- OB: no additional requirements
- O1: closed heel area, antistatic properties, energy absorption in the heel area
- O2: same as O1, plus water penetration and water absorption of the upper material
- O3: same as O2, plus puncture resistance and profiled sole
- O6 and O7: same as O2 or O3, respectively, plus waterproof when assembled
Fully formed rubber and polymer boots for wet areas belong to Class II and are designated O4 and O5.
In our range, you will find models in the OB, O1, and O2 categories, as well as a model with O2 and WR. The designation is included in the product description, for example, “EN ISO 20347:2022 OB, FO, E, A, SR”. This means: basic category OB, plus fuel resistance (FO), energy absorption in the heel area (E), antistatic properties (A), and slip resistance with glycerin (SR). The 2012 edition of the standard has been withdrawn; the current standard is DIN EN ISO 20347:2024-06 (EN ISO 20347:2022 + A1:2024).
What the categories do not cover: a toe cap is not one of the requirements. Anyone who needs protection against falling objects should choose Classes S1 to S3 of EN ISO 20345. Additional symbols such as A, E, FO, HI and CI or SR can also be found on work shoes.
Our guide Safety Shoes: What Really Matters When Buying for Your Business explains the differences between the classes, while Choosing the Right PPE: What Lies Behind Categories and Standards provides an overview of categories and standards. You can find additional abbreviations in the PPE Glossary.

Six points to check before ordering work shoes
These points help companies before ordering and complement the risk assessment:
- Check hazards: If there is a risk from falling or striking objects, a work shoe alone is not sufficient.
- Clarify moisture requirements: O2 checks the upper material; shoes with WR are waterproof. In the range, for example, the RILEY in O2 WR.
- Check markings: The standard, year of issue, and CE marking are on the shoe; older models may still feature SRA, SRB, or SRC.
- Note ESD: Some models are designated as ESD shoes, which is important in electrostatically sensitive areas.
- Choose the design: Low shoes, clogs, and sandals differ in support and ventilation; the category is indicated on the shoe.
- Care sector: White models such as MADDOX and MARC are also categorized under Medical & Care.
The Elten Shoes Size Chart provides guidance on sizing. Suitable socks and accessories and workwear can be found in the shop.
Questions and Answers about Work Shoes
Are work shoes slip-resistant?
Are work shoes slip-resistant?
Since the 2022 standard, slip testing on ceramic tiles with a sodium lauryl sulfate (NaLS) solution has been a basic requirement; according to the DGUV, this applies to safety and occupational footwear. The SR symbol indicates an additional test on ceramic tiles with glycerin. Our assessment: For greasy or wet floors, such as in meat and sausage shops, it is worth looking for SR.
Can I wear a safety shoe where a work shoe is sufficient?
Can I wear a safety shoe where a work shoe is sufficient?
Yes. According to the DGUV short code overview, S1 has the same basic requirements as O1, S2 has the same as O2, and in addition, the safety shoe has a toe cap. Whether it makes sense there depends on the application, for example, on comfort. Conversely, a work shoe does not replace a safety shoe.
What does FO mean for work shoes?
What does FO mean for work shoes?
FO stands for fuel resistance. The symbol is an additional symbol and applies to safety and occupational shoes. For occupational shoes, according to the DGUV summaries, FO is never part of the O1 to O3 categories, so the manufacturer lists it additionally. In the range, it is listed for several ABEBA occupational shoes, for example in the designation "OB, FO, E, A, SR".
What is safety footwear?
What is safety footwear?
Safety footwear according to EN ISO 20346 has a toe cap for medium impact, which is tested with 100 joules of impact energy and 10 kilonewtons of pressure force. For safety shoes according to EN ISO 20345, it is 200 joules and 15 kilonewtons; work shoes do not need to have a cap (DGUV). The current edition of the standard for safety footwear is DIN EN ISO 20346:2024-06.
Can I wear work shoes with orthotic insoles?
Can I wear work shoes with orthotic insoles?
This depends on the model. According to the DGUV, shoe manufacturers provide information on whether and which insoles may be used. The DGUV also provides a positive list of orthopedic foot protection in the subject area of foot protection. Clarify the use of the insole with the manufacturer before use to ensure that the tested properties are maintained.
When should work shoes be replaced?
When should work shoes be replaced?
The definitive criteria for determining when footwear should be discarded are set out in DGUV Rule 112-191, December 2025 edition. These are wear and tear and damage that preclude safe use. Typical indicators are a heavily worn or delaminating sole, cracks in the upper material, and footwear that no longer fits securely. Our assessment: A worn sole compromises slip resistance, which is particularly important for occupational footwear used in retail and care.
Weiterführende Links und Quellen
Quellen
- DGUV, Fachbereich PSA: Welche Anforderungen beinhalten die Kurzzeichen?
- DGUV, Sachgebiet Fußschutz: Normen und Zehenkappen
- DGUV: Beispielliste Fußschutz für ausgewählte Tätigkeiten, Stand 12.03.2024
- DIN Media: DIN EN ISO 20347:2024-06, Berufsschuhe
- DIN Media: DIN EN ISO 20347:2012-05, zurückgezogen, Anwendungsbereich
- DIN Media: DIN EN ISO 20346:2024-06, Schutzschuhe
- DIN Media: DIN EN ISO 20345:2024-06, Sicherheitsschuhe
Abgerufen am 29.10.2026.
Hinweis: Diese Seite informiert allgemein (Stand 29.10.2026). Welche Schutzausrüstung erforderlich ist, ergibt sich aus der Gefährdungsbeurteilung Ihres Unternehmens. Im Zweifel klären Sie die Auswahl mit Ihrer Fachkraft für Arbeitssicherheit.


